This is a video on how to build a DIY 35 site aeroponic cloner machine/system to root and grow plant cuttings. I built this system to quickly propagate cuttings from Peppers, Tomatoes, and perennials such as Arbovitae, Weigela, Roses, and Purpleleaf Sandcherry among others. This unit could also be used as an aeroponic growth chamber for small plants until ready for transplant. Below is a list of most, if not all, of the parts and tools used in this build. Most parts used, where bought from a local hardware store and at amazon.com. A link to those items can be found below.

This video is for illustrative purposes only. Please read the instructions on any purchased items and be sure to do your own measuring to double check things will fit as you expect them to.

Many items where purchased in larger packs than I needed for this build in order to get cheaper per piece, bulk price. Allowing me to have parts for a second build or as replacements.

If you’d rather skip the work and buy a pre made machine
here is a 36 site unit for about 🙂

36 SITE CLONE MACHINE: http://amzn.to/2eazTUq

PARTS
(NOTE: The video has 1″ pipe and fittings. That Is WRONG. I used 1/2″ pipe and fittings)
27 Gallon Tote: Menards – (best option)
Tote (vary’s slightly): http://amzn.to/2eEGSo8
360 clone Sprayers: http://amzn.to/2esEa9u
Neoprene Collars: http://amzn.to/2dwsnp8
Water Pump: http://amzn.to/2esEiWs
2” Net Pots: http://amzn.to/2kVikuk
Timer: http://amzn.to/2esELI4
LED shop lights: http://amzn.to/2dwwqBI
Foam Tape: http://amzn.to/2eaEplY
Pipe & Fittings 1/2”: (probably cheaper at local store)
Elbows: http://amzn.to/2oqPgyO
T Fittings: http://amzn.to/2nxUXqY
Male Coupler: http://amzn.to/2oqJFsI

TOOLS
Cordless Drill: http://amzn.to/2eheQAX
Pipe Cutter: http://amzn.to/2eEC2XW
2 1/8” Hole Saw: http://amzn.to/2dwz0b4
11/64” Drill bit: http://amzn.to/2dwAGBa (probably cheaper at local store)
10/32 Thread Tap: http://amzn.to/2ehbk9B
Pruning Shears: http://amzn.to/2ehbKNA
X-acto Knife: http://amzn.to/2eSXPiw

EXTRAS
Rooting Gel: http://amzn.to/2esF5GX
Clear Rez: http://amzn.to/2eipom0
PH up/down: http://amzn.to/2esKXzL

Thanks again for watching!

UPDATE: Time it took for roots to form on cuttings:
Mums = 10 days
Basil = 11 days
Stevia = 24 days
Geraniums = 29 days
Roses = 4 weeks

How To Build Aeroponic Cloner 35 Sites to Root/Grow/Propagate Plant Cuttings DIY

About The Author
-

20 Comments

  • Bruno E. Santos

    I am so lucky and grateful I came across this video.  I am impressed with how you produced and presented this video.  You might not realized it but you just wrote / implemented the Standard of how a DIY video must be done.  It is professional grade at its best.  I am blown away. 
    Thank you!

  • Curtis Jones

    I think I followed your plan pretty close. Mine leaks around top even with foam on top. Put tomatoes in it. Just water. So is it better to put in a nutrient solution or one of the rooting solutions. I see some say just water works. Then timer or no timer. It has been about 10 days, most plants are still alive, but only a few have very little hairs. Timer recommendations and on off. I really want to get this down before it becomes blackberry propagating time. any advice welcomed

    And this is the best video on here. Built it with no problems. My leak may because foam, and those knobs or stick up on the top.

  • MyLittleGardenPlace

    Def the best video for a cloning machine I've seen yet. I was going to buy another Clone King but I am going to do this instead. I like the option of being able to use net pots too. I'm curious to know how much water you add in this. Also how often to you change the water? The water warms up fairly quickly in my Clone King. Thinking I should put that on a timer.

  • Karma's B1tch

    Thanks a lot! I really appreciate what you've done here. I'll go tomorrow to the dollar store to get some plastic container and start building my own.
    It's great how simple you kept the whole thing.

  • Ramsey Pharoah

    I drilled the 2 1/8 inch holes but my net pots go right through. I have the same brand net pots (teku 5.5 lb 2 1/8 inch) as suggested in the video, but they're just barely to small and they fall through.

  • Hugo

    does it have to be closed Cell vinyl? i used rubber window stripping and the self adhesive came off and it started leaking when the "rubber" absorbed the water… which it isn't supposed to do…

Leave a Reply to Angel Gutierrez Cancel reply